Ask an AI about this article
Get a quick summary or ask follow-up questions about pricing for your home.
Most residential pressure washing in Walworth County costs between $150 and $700 per service in 2026, depending on what you’re cleaning. Per square foot, expect to pay $0.15 to $0.75. This guide breaks down real pricing for every common service so you can budget before requesting a quote.
If you’ve been searching for pressure washing prices, most of what you’ll find online is written for a national audience. Those numbers don’t reflect what people actually pay here in southeastern Wisconsin, where our climate, labor costs, and seasonal demand create a different pricing picture.
We put this guide together to give Walworth County homeowners real, local pricing. We price our house washing services by the square foot, not by the hour, so you know what you’ll pay before we show up. We measure your property using Google Earth and send a detailed estimate through our quoting software. No on-site visit required for a quote, and no surprises on the invoice.
Below, you’ll find pricing for every common exterior cleaning service in the area, what drives costs up or down, how to save with bundles and discounts, and what you can expect from us specifically.
What Does Pressure Washing Cost in Walworth County?
Here’s what each service typically costs in the Walworth County area. Our confirmed pricing is noted where applicable. All other ranges reflect what homeowners in this market typically pay based on local data.
| Service | Cost Range | Per Sq Ft |
|---|---|---|
| House Washing (Soft Wash) | $250–$500 | $0.15–$0.22 (our rate) |
| Driveway Cleaning | $150–$350 | $0.15–$0.20 |
| Roof Cleaning (Soft Wash) | $300–$700 | $0.30–$0.50 |
| Deck Cleaning | $150–$350 | $0.25–$0.50 |
| Gutter Cleaning | $150–$1,300 | By linear foot |
| Window Cleaning | $150–$350 | $3–$12 per pane (our rate) |
| Concrete Sealing | $450–$12,000 | Varies by project |
| Fence Cleaning | $100–$300 | $0.20–$0.50 |
These are typical ranges for Walworth County. Your actual cost depends on your property’s size, condition, and the services you need. Contact us for a free, no-obligation estimate.
A note on the wider ranges: most residential gutter cleaning jobs fall between $150 and $400, with the $1,300 figure representing large, complex properties. Concrete sealing follows a similar pattern. Most residential sealing jobs land between $450 and $1,500, but large estate-scale or commercial projects can run significantly higher.
How Much Does a House Wash Cost by Home Size?
Homeowners usually think about their home’s total square footage, not the square footage of a single wall. This table translates our confirmed house washing rate ($0.15–$0.22 per square foot) into total job cost by home size.
| Home Size | Estimated Cost | Property Type |
|---|---|---|
| 1,000 sq ft | $150–$220 | Small ranch or cottage |
| 1,500 sq ft | $225–$330 | Average single-story |
| 2,000 sq ft | $300–$440 | Typical Walworth County home |
| 2,500 sq ft | $375–$550 | Larger two-story |
| 3,000 sq ft | $450–$660 | Large home or lakefront property |
| 3,500+ sq ft | $525–$770+ | Premium or estate near Geneva Lake |
These estimates cover house washing (siding) only. Driveway, roof, gutters, and other surfaces are priced separately. Two-story homes fall within the same per-square-foot range, but height, buildup severity, and siding material (brick requires longer dwell time than vinyl) may push your quote toward the upper end.
Most homes in Walworth County are single-story or two-story with vinyl siding. If that describes your property, the 2,000-square-foot row is a reasonable starting point for budgeting.
Pressure Washing Cost Breakdown by Service
Every service has different equipment, chemicals, and time requirements. Here’s what each one costs in Walworth County, what’s included, and what factors push the price higher.
House Washing (Soft Wash)
Our house washing starts at $0.15 per square foot and tops out around $0.22, depending on conditions. A typical 2,000-square-foot home runs $300 to $440.
Every house wash includes a full soft wash with sodium hypochlorite and surfactant, vegetation protection (we water your plants before, during, and after), chemical application with dwell time, and a complete rinse. Most jobs wrap up in about 60 to 90 minutes.
Your cost increases if the home needs oxidation removal, efflorescence removal, or if you have brick or stucco siding that requires a stronger solution and longer dwell time. See the Add-On Services section below for details and pricing on specialty treatments.
Every house wash includes an exterior gutter rinse at no extra charge. Pair it with a driveway cleaning and you’ll save 10% on the combined bill.
Driveway and Concrete Cleaning
Most Walworth County homeowners pay $150 to $350 for driveway and concrete cleaning, with per-square-foot rates typically running $0.15 to $0.20 in this area. A standard two-car driveway (around 500 square feet) usually costs $100 to $150.
A standard job includes pre-treating the surface with a chemical that kills organic growth, running a surface cleaner across the entire area, detailing the edges with a wand, and a full rinse. Most driveways take about an hour to an hour and a half.
Oil stains, rust stains, and efflorescence are the main cost drivers beyond the base cleaning. Each is quoted as a separate line item so you see the cost before approving the work. One thing worth knowing upfront: concrete is porous, so deep oil stains may lighten significantly but may not disappear completely, especially if they’ve been there for years.
Every driveway cleaning includes sidewalk cleaning up to a set length at no extra charge.
Roof Cleaning
Roof cleaning in Walworth County typically costs $300 to $700, with per-square-foot rates in the $0.30 to $0.50 range depending on roof size and pitch. Time varies widely. Our shortest roof job has taken about an hour and a half; the longest ran about nine hours on a very large property.
We clean roofs exclusively with soft washing. We apply a chemical solution from the ground or from a ladder, place chlorine-neutralizing tablets inside the gutters to protect your landscaping, and bag the downspouts near vegetation. We don’t rinse the roof. The chemicals break down organically over the following weeks, and the staining fades as rain washes the residue away.
Before we start, we document any existing damage like loose shingles or flashing issues and share those findings with you after the job.
Soft washing is the only cleaning method recommended by the Asphalt Roofing Manufacturers Association (ARMA). Pressure washing strips the protective granules from shingles and can void your manufacturer’s warranty. Every major shingle maker, including GAF and Owens Corning, says the same thing. If a contractor quotes you roof cleaning with a pressure washer, find a different contractor.
We offer at least a one-year warranty on roof cleaning in Walworth County. Every roof wash also includes free gutter cleaning.
Gutter Cleaning
Our gutter cleaning starts at $150 for smaller homes and can run up to $1,300 for large or complex properties. Most residential gutter jobs fall in the $150 to $400 range.
Interior gutter cleaning includes debris removal using vacuums and extension pole tools, a blower pass for granules and small debris, and downspout flushing. Exterior gutter cleaning (the face of the gutter) comes included with our house wash. Tiger stripe removal, which is the dark vertical streaking caused by oxidation, is a separate service that requires specialized chemicals and manual wiping.
Gutter guards are the biggest cost driver. If your gutters have guards, we need to remove them before cleaning and reinstall them afterward. That adds time, labor, and cost to the job.
We recommend cleaning gutters at least twice a year in Walworth County, once in spring and once in fall. Clearing debris before winter reduces the risk of ice dams, which are one of the most expensive forms of preventable water damage in this climate.
Deck, Fence, and Wood Surface Cleaning
Deck cleaning in Walworth County typically costs $150 to $350. Fence cleaning runs $100 to $300. Per-square-foot rates for both are generally $0.25 to $0.50.
The process includes pre-wetting the surface, applying a cleaning solution, allowing dwell time, pressure washing with an appropriate tip (usually a 40-degree nozzle to avoid gouging the wood or composite), and rinsing the surrounding area. Most deck jobs take about two hours.
If you want wood restoration (cleaning plus brightening plus staining), expect the total to run two to three times the cost of cleaning alone. We handle staining through a trusted subcontractor, but we manage the full project so you only deal with one company.
Composite and Trex decking is the most common in this area. Wood decks are less common but still something we clean regularly.
Window Cleaning
Our window cleaning runs $3 to $12 per pane, depending on the size of the window and whether it’s on the first or second story. A typical home job totals $150 to $350.
Each pane gets scrubbed with a window cleaning solution, scraped with a straight blade if needed, squeegeed, and finished with a frame and sill wipe-down. We clean both interior and exterior windows. A standard home with 15 to 25 windows usually takes 60 to 90 minutes.
Second-story windows, storm windows, and heavily soiled panes push the price toward the higher end. We offer seasonal window cleaning packages (two to four times per year) at discounted rates for homeowners who want to stay on a routine.
Concrete Sealing and Paver Sealing
Concrete sealing starts at $450 for smaller residential jobs. Most residential projects fall between $450 and $1,500. Large estate-scale or commercial sealing jobs can run up to $12,000 depending on square footage and complexity.
Sealing is a multi-day process. Day one covers the cleaning (and sanding for paver sealing). Day two or later is the sealer application, and it can only happen after at least 24 hours of dry weather. Moisture trapped under the sealer causes scaling and discoloration, which means a failed job and a redo.
We use Brickform Polyseal, a solvent-based sealer built for Wisconsin’s freeze-thaw cycles, road salt, and snow loads. For stamped concrete (the most common high-end surface in this area), we add a grip additive to the sealer for safety when the surface is wet. We apply the sealer and back-roll it for an even finish.
Factors that increase cost include stamped concrete versus plain concrete, paver sanding (separate from sealing), tinting for older pavers, and large surface areas. Plan to budget for a recoat every two to four years.
Add-On Services and Specialty Treatments That Affect Your Price
Base cleaning prices cover standard dirt, algae, and mildew. If your property has specialty staining, here’s what the extra work typically costs.
| Add-On | What It Treats | Cost |
|---|---|---|
| Oxidation Removal | Chalky residue on vinyl or aluminum siding | $75–$200+ |
| Rust Removal | Orange/brown staining on concrete or siding | $50–$150+ |
| Oil Stain Removal | Driveway or garage floor oil spots | $50–$150+ |
| Efflorescence Removal | White mineral deposits on brick or concrete | $75–$200+ |
| Tiger Stripe Whitening | Dark vertical streaks on gutter face | $100–$300+ |
| Clay/Mud Removal | Ground-in clay on vinyl siding | $50–$100+ |
| Two-Story Surcharge | Any service on a 2+ story building | +30–50% over base |
| Gutter Guard Removal | Homes with gutter guards installed | +$100–$200+ |
Add-on costs vary by stain size, severity, and surface. Ask for these to be itemized in your quote so there are no surprises.
Rust usually lightens significantly and often comes out completely. Oil is harder. Concrete is porous, and deep oil stains that have been sitting for months or years may lighten but may not fully disappear. We set that expectation before starting so there are no misunderstandings after the job.
Oxidation removal on vinyl siding is one of the most labor-intensive add-ons. It requires a specialized chemical, a five-minute dwell, manual scrubbing, rinsing, and often a second application. If your siding has a chalky white film, budget for this on top of your house wash.
What Factors Move Pressure Washing Prices Up or Down?

Several variables determine where your final quote lands within the ranges above.
Surface type and material. Vinyl siding is the fastest and least expensive to clean. Brick and stucco require stronger chemical solutions and longer dwell times. Wood and composite decking need careful pressure control to avoid surface damage. Each material has a different cost profile.
Condition and contamination level. A home cleaned annually is a straightforward job. A home that hasn’t been cleaned in five years, with layers of algae, mold, and oxidation, requires more chemical product, longer dwell times, and potentially multiple passes. Routine maintenance keeps your per-visit cost lower.
Building height. Two-story homes add 30 to 50 percent to the base price because of ladder work, additional safety precautions, and the extra time it takes to work at height.
Water access. We bring 200 to 250 gallons of water at no extra charge and then connect to your outdoor spigot. If a property doesn’t have water access, we typically won’t take the job because the logistics don’t make sense for the homeowner or for us.
Minimum service charges. Most professional companies charge a minimum of $100 to $250 per visit, regardless of job size. A small standalone job (one short sidewalk section, for example) will likely hit the minimum rather than the per-square-foot rate. That covers travel, equipment setup, chemical prep, and teardown.
Seasonal demand. May and June are the busiest months in Walworth County. Every homeowner wants their property cleaned after winter. Booking in late April or in September and October may give you more scheduling flexibility.
Pricing model. We price by the square foot, which gives you a firm number tied to your property’s actual size. Some companies price by the hour, which means a slower crew costs you more. If a company quotes hourly, ask how many hours they expect and whether there’s a cap. When evaluating any quote, look for itemized services, add-ons listed separately, payment terms, and confirmation that the company carries insurance.
How to Save on Pressure Washing in Walworth County
The simplest way to lower your cost per service is to bundle. We offer 10% off when you book two or more services together.
| Bundle | Estimated Total | With 10% Off | You Save |
|---|---|---|---|
| House Wash + Driveway | $600 | ~$540 | ~$60 |
| House Wash + Roof + Gutters | $1,150 | ~$1,035 | ~$115 |
| Driveway + Concrete Seal | $900 | ~$810 | ~$90 |
| Full Property | $1,600 | ~$1,440 | ~$160 |
Bundle estimates use mid-range pricing. Your actual quote will reflect your property’s specific needs.
Other ways to save:
Veterans and first responders get 5% off every service. Refer a friend and earn $50 off your next booking when they sign up. Ask for a full-property estimate rather than quoting services one at a time. And stay on a routine. Homes cleaned on a regular schedule need less chemical product and fewer passes, which keeps the per-visit cost down.
The Real Cost of Waiting
Pressure washing isn’t just a cosmetic expense. Delaying it costs more in the long run. With a median home value of $302,700 across the county and a median sale price of $425,000 (trending up 17% year over year), even a small maintenance investment protects an asset worth hundreds of thousands of dollars.
Roof replacement vs. roof cleaning. Algae and moss growth shortens the lifespan of asphalt shingles. A $300 to $700 soft wash every two to three years helps protect a roof that costs $10,000 to $25,000 to replace.
Concrete repair vs. concrete sealing. Walworth County’s freeze-thaw cycles cause unsealed concrete to crack, spall, and scale. A $450 to $1,500 sealing job every two to four years prevents deterioration that can lead to $3,000 to $8,000 or more in concrete replacement.
Ice dam damage vs. gutter cleaning. A $150 to $400 gutter cleaning twice a year prevents ice dams that can cause $5,000 to $15,000 in water damage to your fascia, soffit, and interior ceilings.
Neglected siding before selling. In Walworth County’s housing market, homes sit on the market for an average of 58 days. A $300 to $500 house wash before listing costs far less than the price reduction a dirty exterior can trigger during buyer negotiations.
Year-over-year buildup. A home cleaned annually might cost $300 per visit. That same home, cleaned for the first time in five years, may need stronger chemicals, longer dwell times, and multiple passes. The bill for a deep restoration clean can easily run $500 to $700 or more for the same surface area.

Frequently Asked Questions
Does pressure washing increase home value?
Not directly on an appraisal, but it has a measurable impact on curb appeal. In Walworth County, where the median sale price is $425,000 and rising, a clean exterior helps your home photograph better for listings and creates stronger buyer impressions. Real estate agents in this area consistently recommend pressure washing before putting a home on the market.
What happens if it rains on the day of my service?
For pressure washing and soft washing, light rain usually isn’t a problem since the surfaces are already wet. Concrete and paver sealing is different. The surface must be completely dry for at least 24 hours before and after we apply sealer. If rain is in the forecast, we’ll reschedule the sealing phase to protect your investment.
Get Your Free Pressure Washing Estimate
The prices in this guide reflect real Walworth County jobs and current area market rates. Your property is unique, and the best way to know exactly what you’ll pay is a free estimate tailored to your home.
We measure your property using Google Earth, build a transparent quote with itemized pricing, and send it within 24 to 48 hours. No on-site visit needed. No pressure. No obligation.
Call us at (262) 949-9119 or request your free estimate online.

